A way to convert text to pcx with DOC to Any Converter Command Line

To convert text to pcx with DOC to Any Converter Command Line, please follow the several steps below:

1. Download this converting tool first, you can click this link to save the program: https://www.verydoc.com/doc2any_cmd.zip.

2. Install DOC to Any Converter Command Line, please open “doc2any_cmd” to double-click the program of “doc2any.exe”.

3. Start the operating environment, and there are 2 ways to choose to open the command prompt window:

  • click “Windows+R” > input “cmd” > press “ok”;
  • click “start” > select “Run” > type “cmd.exe” > click “ok”.

and there is a current directory that is “C:\Documents and Settings\admin>” in the command prompt window.

4. Open DOC to Any Converter Command Line. To open the main tool in the command prompt window, you should type the path of “doc2any.exe” or drag and drop “doc2any.exe” into the command prompt window. Then you can input the parameters if you need to edit the properties of the targeting files in the command prompt window. Then the next step is to drag and drop the text file into the command prompt window, which can be displayed as a source path in the command prompt window, in other words, you can get the same result inputting the source path directly in the command prompt window. To set the targeting format and the objective folder, please type the objective path in the command prompt window after adding the source file for the conversion from text to pcx. Then click “enter” to complete the input and make hte program help you convert text file to pcx file directly in the command prompt window. More info on the exact format, please refer to the following example:

F:\doc2any_cmd\doc2any.exe<space>

<options><space>E:\BITCH.txt<space>C:\BITCH.pcx<enter>

(note: “<options>” is the representative of the parameters; “<space>” is to click “space”; “<enter>” is to click “enter”)

……………………………………………………………………………………………………………………………………………

Please comply with the format of the conversion like the example above when you need to get your own process. And the conversion above is just the single one, what if we have lots of source files needed to be converted into the objective files? How can we do? It is not a problem at all to DOC to Any Converter Command Line. If you do not want to repeat the single conversion with the same steps like the example above, there is a knack to comply in the batch process with DOC to Any Converter Command Line, which is as follows:

  • make sure the source files can be in the uniform folder;
  • replace the file names in all of the paths with the wild card character “*”.

Then the format and the precedure is the same as the one in the single process example, if you want to know more info, please see the following example:

F:\doc2any_cmd\doc2any.exe<space>

<options><space>E:\*.txt<space>C:\*.pcx<enter>

(note: the command lines above help us convert text files on disc “E” into pcx files one time)

More real parameters, please click:https://www.verydoc.com/doc-to-any-options.html, and any questions, please feel free to contact us here, so far, it is the end of this article about the process from text to pcx. Thank you for your reading!

VN:F [1.9.20_1166]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.20_1166]
Rating: 0 (from 0 votes)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *


Verify Code   If you cannot see the CheckCode image,please refresh the page again!