A way to get the specific dimension wmf in the conversion from ppt to wmf

DOC to Any Converter Command Line can help you set the dimension of wmf in the conversion of ppt to wmf, which has been designed to help users convert the Office files and the OpenOffice files to any other kinds of the popular files in the single process and the batch conversion. More info about DOC to Any Converter Command Line, please click this link to know more: https://www.verydoc.com/doc-to-any-options.html.

To get the specific dimension wmf during the conversion from ppt file to wmf file, you can follow the steps below to achieve this goal:

Step1. Install DOC to Any Converter Command Line:

There are 2 steps to install DOC to Any Converter Command Line, please see the following parts:

  • Click this link of https://www.verydoc.com/doc2any_cmd.zip and save the program of DOC to Any Converter Command Line in order to download DOC to Any Converter Command Line
  • Release the folder of “doc2any-cmd” to your computer, then double click “doc2any.exe” to install DOC to Any Converter Command Line

Step2. Open the running environment of DOC to Any Converter Command Line:

For Windows systems, the operating environment of DOC to Any Converter Command Line is the command prompt window. And here is the method to open it in your computer:

click “start” > click “Run” > input “cmd.exe” and press “ok” in the dialog box of “Run”

Step3. Input the command lines and process the task:

In the directory of “C:\Documents and Settings\admin>”, you can type the command lines in the command prompt window, and

the following steps in turns are the essential operations in the command prompt window, which you can refer to:

  • Run DOC to Any Converter Command Line

to run DOC to Any Converter Command Line, please drag and drop the program of “doc2any.exe” into the command prompt window;

  • Edit the properties of the emf files

to set the options of the emf files, such as the dimension, please input the parameter of “-useprinter –xres 200 –yres 200, for example, after the launch of DOC to Any Converter Command Line;

Additional knowledge:

wmf is the format of the vector image, and the dimension of the vector image file can be edited by the change of the resolution, and the resolution is affected by the printer, so for DOC to Any Converter Command Line, it is essential to use the virtual printer to set the resolution of the wmf images, and here is the key point: the higher resolution can lead to the bigger dimension of the vector image.

  • Add the ppt file for the conversion

to add the single ppt file, please input the path of the single ppt file in the command prompt window;  

  • Edit the objective folder and set the objective format and the filename

to edit the objective folder and set the targeting format and the filename, please input the objective path.

Step4. After the basic preparation, click “enter” to convert ppt to wmf in the command prompt window. Here is the example with the strict format that is essential for the entire conversion:

F:\doc2any_cmd\doc2any.exe<space>-xres<space>200<space>

-yres<space>200<space>G:\fire.ppt<space>H:\fire.wmf<enter>

(note: <space> is to click “space”)

At the end of this article, I believe you can handle the knack about how to get the specific dimension wmf in the conversion from ppt to wmf with DOC to Any Converter Command Line. And any questions about this article, please give me a comment here, and thank you for your precious opinion and support!

VN:F [1.9.20_1166]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.20_1166]
Rating: 0 (from 0 votes)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *


Verify Code   If you cannot see the CheckCode image,please refresh the page again!